Shoe care guide

Take care of your shoes

Shoe love is true love! To ensure that you enjoy your new gems for a long time, it is important to take good care of them. All shoes are protected from the factory with a spray, but this is a process that must be repeated to extend the lifespan of your shoes. If you have shopped for new shoes and you are going to give them a place in your shoe collection, first make sure that you have given them a layer of self-love. You do this by spraying them with a universal leather spray. This creates a thin layer that protects your shoes against outside dirt. Repeat this process at least once a month, but make sure that your shoes are completely clean before applying a new protective layer!

DWRS all-round cleaner is a highly effective, mild and biodegradable solution for deep cleaning of all natural and synthetic absorbent materials, as well as leather. The high-quality ingredients penetrate deep into the fibers and ensure unparalleled removal of dirt and stains.

All-round cleaner

How to use?

1. Shake before use.

2. First remove all dirt.

3. Moisten a clean brush with lukewarm water.

4. Apply several sprays of the cleaner to the brush.

5. Scrub the surface to be cleaned to create a thick foam.

6. Wipe dry with a clean cloth.

7. Repeat the previous steps if necessary.

8. Allow to dry for 24 hours at room temperature.

The DWRS all-round cleaner remains active deep in the fibers during this time. Test in advance on a non-visible surface. Finally, always clean the entire surface to prevent color differences after drying.

The DWRS all-round protector is an advanced protection formula for shoes, clothing and furniture. The protective layer is extremely repellent of moisture, dirt and oil. It also makes the material easy to clean and prevents the formation of stains. The protector protects each individual material fiber with a thousand molecules, is water-based and 100% invisible. Suitable for all natural and synthetic absorbent materials, as well as leather.

All-round protector

How to use?

1. Shake before use.

2. Ensure a clean and dry surface.

3. Spray the material from a distance of 10-15 cm.

4. Rub gently with our dry brush or cloth.

5. Repeat at least twice with ten minute breaks in between.

6. Dry for 24 hours at room temperature.

7. Pre-test on a non-visible surface.

8. Repeat this process every few weeks depending on the frequency of use of the injected item.

Shoe care package

If you want to take the best possible care of your shoes, you can order a package including protector, cleaner, brush and cloth.

Order a Shoe care package now for €39.95.